Plasterboard wall alignment by the builders of the company “Prof Stroy”
For the installation of cladding, partitions and ceilings in the premises, many modern building materials are used.
Profi Stroy specialists align the walls with drywall, since this option is recognized as the most reliable and less time-consuming.
This building material is a sheet, which consists of a layer of hardened gypsum with special fillers and two layers (on each side) of building board. Due to the combination of such qualities as accessibility and practicality, the product is very popular in many repair work.
Today, wall alignment with drywall can be done in two ways:
Frameless - the installation of sheets is carried out on an adhesive basis, so the procedure takes more time. Please note that it is necessary to use only special glue, which reliably fastens cardboard with concrete, brick or any other base.
Before starting the installation of drywall, you should prepare the surface. To do this, specialists eliminate dust deposits and dirt, be sure to primer the wall. Then the curvature is measured, if the indicator is from 4 to 7 mm, then the glue is applied in the usual way and distributed with a notched trowel. When the curvature reaches 20 mm, the adhesive base is applied with cakes with gaps between them. If the measurements showed large deviations, it is necessary to additionally putty.
Aligning the walls with drywall is carried out in several stages. First, the surface is primed. After it has completely dried, you can begin to prepare the glue, being guided by the manufacturer's instructions on the label. Next, the application / distribution of the adhesive mixture to the area where the sheet will be located. Also, small cakes should be applied to the inner surface of the plate for greater bonding of the material. Then the sheet is applied to the wall and flattened using a wooden hammer or with a rubberized tip. After laying each subsequent plate, the surface is checked for roughness.
Installation of drywall frame method is carried out using metal profiles or wooden beams. The first option is more reliable, since wood can absorb moisture from the air over time, which causes a change in their original shape. In other words, the sheets may go apart, and unwanted gaps or crevices will appear in the structure.
Our experts work with high-quality metal profiles that have good physical and technical characteristics, which increases the operational life of the structure.
To align the walls with drywall, two types of profiles are used - rack-mount and guides. The latter - are fixed between the floor and the ceiling parallel to each other, and between them rack elements are mounted. The distance between the posts should be between 40 and 60 cm, which makes the structure more durable. Also, do not forget to install suspensions that provide reliability.
After the frame has been erected, plasterboard products are fixed with screws to the rails. Fasteners need to be screwed into the material as carefully as possible, since there is a risk of spoiling it. The number of necessary self-tapping screws is quite simple to calculate - 100 pieces per standard-size canvas (2500x1200 mm).
The last step in leveling the walls with drywall is puttying. Specialists must visually hide the places where the screws were screwed, and also process the joints between the blades. It is better to use a special tape - a sickle, which has a mesh structure and provides the maximum rate of adhesion between surfaces. Next, a primer is carried out, and then putty is performed until perfect evenness.
The presented methods of installing drywall and leveling the walls are very reliable and fast in time. Do not postpone the repair of your house for tomorrow, use the services of the company “Prof Stroy”! Contact our manager to discuss details and ask questions.
Already at your facility, we will accurately calculate the amount of material needed for construction and repair, tell you which gypsum board sheets to buy (moisture-proof or normal), which UD and CD profile to choose (reinforced or normal), the same story with suspensions, they come from metal of different thicknesses, how many screws for metal and wood to buy and how many “fleas” you need to take. Also with us you can order a working design project of an apartment or house in Kherson, Nikolaev, Odessa
Tags: 2 karaks na podvesah herson, karkas dlya potolka from gipsokartona, leveling walls with drywall, leveling walls with drywall builders at Profi Stroy, drywall workers, Odessa, expensive Kherson repairs, multi-level ceilings Kherson building, drywall construction workers, rent, rent, dryers in Kherson, gypsum plasterboard ceiling in Kherson, pros build Kherson, make repairs to order Kherson, builders pros Kherson, construction on order in Kherson, Ukraine builders Kharkiv Kherson Odessa